Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Lennox Air Duct Cleaning in Georgetown, TX
We provide independent Lennox air duct cleaning, dryer vent cleaning, and duct repair across Georgetown, TX, and we’re not affiliated with, authorized by, or sponsored by Lennox. What makes our Lennox work here different is the housing: this city’s rapid growth means we spend as much time clearing construction debris and blown insulation out of sealed return plenums as we do cleaning decades of grime in older hard-ducted homes near the Square. Contractor-grade equipment, residential pricing – Rotobrush rotary brushes, Nikro vacuum and collection systems, and Abatement Technologies negative-air containment on every job. Call (844) 560-6431 for a free estimate.

Why Georgetown Residents Choose Us for Lennox Service
We understand Lennox equipment because we see it daily in Georgetown’s diverse housing stock, from builder-grade flex systems in Sun City to older hard-ducted setups near the Square. Our independent technicians know the specific failure points of Lennox coils, blowers, and duct interfaces under local conditions, and no manufacturer authorization is implied or claimed. Our technicians have up to experience, and they’ve spent that time learning how a Lennox air handler behaves when its return side is fighting 140°F+ attic heat.
We use OEM Lennox parts for critical components like coils and blower motors when available, and quality aftermarket equivalents for duct sealing and insulation to balance cost and performance. That matters because a duct joint that fails at 150°F needs different materials than one that fails at 90°F. Scheduling is straightforward in Georgetown: we book a time, we agree one flat price per system before any work starts, and you get before-and-after photos of your own ducts so you can see what came out. Call (844) 560-6431. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Lennox Air Duct Cleaning Problems We Solve in Georgetown
These are the Lennox-specific problems we run into most often in Georgetown homes:
- Flex duct joint separation in extreme attic heat. Georgetown’s Central Texas summers push attic duct runs above 140°F for months. Builder-grade flex duct in sealed attics degrades at the joints under that load, and a Lennox air handler connected to it starts pulling attic air instead of conditioned air. In newer Georgetown subdivisions, that means insulation fibers and drywall dust straight into the return.
- Evaporator coil clogging from construction debris. Homes under five years old in the Wolf Ranch and Williams Drive areas routinely have drywall dust and blown-in insulation fibers packed into return plenums. Once that material reaches a Lennox evaporator coil, airflow drops, the coil ices or struggles to shed heat, and the system runs longer for less cooling.
- Blower motor dust buildup. Near the Courthouse Square and the older core, Lennox air handlers serving original galvanized duct systems accumulate dust on the blower wheel that a filter never catches. A caked blower wheel cuts airflow and strains the motor.
- Return duct leakage pulling in pollen. Heavy spring pollen from live oaks and mountain cedar in December through February gets drawn through leaking return ducts. When the return side leaks, your Lennox system pulls that allergen load into the living space instead of filtering it.
- Return plenum debris from the build itself. In Sun City and the newer Williams Drive subdivisions, techs pull construction dust and whole chunks of blown insulation out of return plenums as a routine part of the job. It’s less about decades of grime and more about what the builder left behind.
Lennox Service in Georgetown: What Local Conditions Mean for Your Equipment
Georgetown’s rapid growth has left many Sun City and Williams Drive homes with Lennox systems where construction debris and blown insulation clog return plenums within the first five years. That’s a problem rarely seen in slower-growing markets, and it changes what a Lennox duct job here actually involves. In a typical Georgetown home with a Lennox air handler, homeowners often notice reduced airflow and dusty odors after a few years. A technician might find flex duct joints separated in the 140°F attic, pulling insulation fibers and drywall dust into the return. The usual fix involves cleaning the return plenum and coil, then sealing joints with mastic and repairing flex duct to prevent recurrence.
The other half of the story is the older core near the Square, where pier-and-beam floors and hard-ducted galvanized systems behave nothing like slab-on-grade new construction. A Lennox system there usually needs a different approach: careful brush work through rigid duct runs, coil cleaning, and attention to the blower. Two housing stocks, two different problems, one city.
Lennox Models & Products We Service in Georgetown
We service Lennox systems across the whole lineup, including Merit Series equipment like the 13ACX and ML14XC1, Elite Series units such as the EL16XC1 and EL18XCV, and Signature Series systems including the XC21 and SL18XC1. We also work with Lennox Healthy Climate indoor air quality products, so a system with integrated filtration or humidity control gets the same careful attention as the ducts themselves. Our technicians are trained on Honeywell and Aprilaire system components, which means we assess the whole air quality setup rather than just the duct runs.
On critical parts like coils and blower motors, we choose OEM Lennox parts when they’re available and quality aftermarket equivalents for duct sealing and insulation where they perform as well. We repair what other crews clean around, and Air Duct Repair is a standalone service here, not something tacked onto a cleaning invoice.
See the difference
Before
After
Before
After
Before
AfterLennox Service Pricing in Georgetown
We price per job, not per vent, and the written estimate sets the final price. Here are typical estimated ranges for Georgetown work:
| Service | Typical Estimated Range |
|---|---|
| Whole-system air duct cleaning (Lennox system) | $300 – $700 |
| Return duct cleaning and plenum debris removal | $180 – $350 |
| Evaporator coil cleaning | $150 – $300 |
| Duct sealing (mastic and flex duct repair) | $250 – $600 |
| Dryer vent cleaning | $120 – $250 |
What drives the number: how many duct runs the system has, whether the return plenum is packed with construction debris, attic access and how tight the working space is in that 140°F+ heat, and whether joints need sealing or flex duct needs repair. The free estimate includes an inspection of your Lennox air handler, coil, return plenum, and duct runs, and you’ll understand what we found before you approve anything. Call (844) 560-6431 for a free estimate.
Serving Georgetown, TX – Our Local Coverage Area
We serve Georgetown and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Lennox Air Duct Cleaning in Georgetown
No. Duct Cleaning Georgetown is an independent Lennox service provider. We are not affiliated with, authorized by, or sponsored by Lennox, and we don’t claim factory training or certification. Our technicians have up to experience servicing Lennox equipment, and we use OEM Lennox parts for critical components like coils and blower motors when they’re available.
Both, chosen by the job. For critical components like coils and blower motors, we use OEM Lennox parts when available. For duct sealing and insulation, quality aftermarket equivalents can perform as well for less, and we tell you which we’re using and why before work starts. You get one flat price per system, agreed before we begin.
Most whole-system jobs take a few hours, and the free estimate gives you the specific window for your home. The variables are duct run count, attic access, and whether your return plenum is packed with construction debris. A new Sun City home with builder debris can take less time than an older hard-ducted system near the Square that needs careful brush work. We don’t rush thoroughness.
We cover the full range, from Merit Series systems like the 13ACX and ML14XC1 through Elite Series units such as the EL16XC1 and EL18XCV, Signature Series systems including the XC21 and SL18XC1, and Lennox Healthy Climate indoor air quality products. We also service integrated Honeywell and Aprilaire components so the whole air quality system gets assessed.
Typical estimated ranges run $300 – $700 for whole-system cleaning on a Lennox system, with return duct and plenum work at $180 – $350, coil cleaning at $150 – $300, and duct sealing at $250 – $600. The written estimate sets the final price. Call (844) 560-6431 for an exact quote – estimates are free.
Service Areas Near Georgetown
We also serve homeowners in Santa Rita Ranch, Hutto, Liberty Hill, Hudson Bend, and Brushy Creek, plus Cedar Park nearby. For more on our Lennox expertise or our full Georgetown service coverage, see those pages.
Book Your Lennox Service in Georgetown Today
Whether your Lennox system needs duct cleaning, coil and plenum work, sealing, or dryer vent service, we’ll give you a free estimate and a flat price agreed before work starts. Call (844) 560-6431. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed on Saturday.
Written by the team at Duct Cleaning Georgetown.